Add indoor Smart Plugs | Phone Watch SAS

If you don't have a Smart Plug installed

Step 1

Open de PhoneWatch App. go to Smart Plugs, and tap Add.

smart-plug-pairing-selection-language-en

Step 2

Select Indoor Smart Plug and follow the on-screen instructions.

smart-plugs-pairing-wizard-indoor-language-en

Step 3

Plug the device into a power outlet.

- Press and hold the on/off button until the light blinks.

- In the App tap, "Done" and wait for the device to pair.

Step 4

Give your smart plug a name (you can change it later).

Step 5

You will get a confirmation message once the pairing is completed.

If you have a Smart Plug installed

Step 1

Open de PhoneWatch App. go to Smart Plugs, and tap Add (+).

Step 2

Select Indoor Smart Plug and follow the on-screen instructions.

Step 3

Plug the device into a power outlet.

- Press and hold the on/off button until the light blinks.

- In the App tap, "Done" and wait for the device to pair.

Step 4

Give your smart plug a name (you can change it later).

Step 5

You will get a confirmation message once the pairing is completed.

If the Smart Plug fails to connect, try the following:

Move the smart plug closer to your alarm system’s gateway (within 2–3 meters).

While the plug is connected to power, press and hold the power button:

- Wait until it flashes red.

- Keep holding until it starts blinking green.

In the app, go to Smart Plugs, tap Add, and follow the instructions.

Move the smart plug closer to your alarm system’s gateway (within 2–3 meters).

While the plug is connected to power, press and hold the power button:

- Wait until it flashes red.

- Keep holding until it starts blinking green.

In the app, go to Smart Plugs, tap Add, and follow the instructions.

Adding indoor Smart Plug to your alarm system

If you don't have a Smart Plug installed

Step 1

Step 2

Step 3

Step 4

Step 5

If you have a Smart Plug installed

Step 1

Step 2

Step 3

Step 4

Step 5

If the Smart Plug fails to connect, try the following:

Services

Products

PhoneWatch